Best Manufacturer for Special Vehicles in China.
  • Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search

CALL US

+86-137-9310-8666

EMAIL US NOW

You are here: Home » Products » Cold Chain Logistic Facility » Refrigerated Truck Trailer » 40ft Insulated Box Semi Trailer with 3 Axles for Food And Temperature Sensitive Cargos , Insulated Semi Trailer

40ft Insulated Box Semi Trailer with 3 Axles for Food And Temperature Sensitive Cargos , Insulated Semi Trailer

Share to:

Insulated Box Semi trailer
Size: 40ft 3 axle
Material : FRP and PU composite Material
Refrigerator: CARRIER or Thermoking

  • 9303XBW
  • GET
  • 8716
Quantity:

Product Parameters

40ft Insulated Box semi Trailer with 3 axles for food and temperature sensitive cargos

Refrigerator trailers are box trailers with a heating/cooling unit (reefer) attached insulated walls, used for hauling produce, frozen foods, meat, flowers, etc. No quite as common but they are also produced in tautliner models with thicker curtains to sustain the fluctuating temperatures.


Most of the long-distance refrigerated transport by truck is done in articulated trucks pulling refrigerated semi-trailers. Research is done on fuel cell auxiliary power units.


40ft   Insulated Box semi Trailer with 3 axles for food and temperature sensitive   cargos9303XBW
Outside dimension of truck mmLength13000
width2550
height(unload)3990
Dimension of van body mmlength12740
 width2350
height2470
G.V.W   kgs43350
Vehicle   total weight kgs13350
Rated   payload kgs30000
front/rear   Overhang(mm)/2480
Approach   angle/departure angle°/14
max.   vehicle saddle payload kgs14930
tyre11R22.5*12
AxleBPW   12T*3
Wheelbase   (mm)683013101310
Tread:mmTread   at front
Tread at rear1840




Min. Temperature    ℃
All-close panels produced with German Technology   and Machines, adhesive structure with the type of building block, Freon-free   polyurethane vesicant material is our innovation,which are very different   from traditional open sandwich panel with connect by metals, injected   polyurethane at site with Freon.Our surfaces of panels are FRP, the middle   with PU foam sheet, The Both surface FRP is connected by FRP stiffener to the   whole, During producing, the E-glass fiber, UPR(unsaturated polyester ester   resins) and fluorine-free PU foam structured together after heating and   pressing , which also makes a layer of UV protection, waterproof, anti-aging,   Anti-corrosion in the outer side surface of the panels at the same   time.
   
    The main characters are as follows:
    1. Light in weight:40% lighter than metal body.
    2. Better insulation: K value less than 0.3w/sqm*k.
    3. High in strength and long life: 5 times longer than metal body.
    4. Non-corrosion, non-pollution, anti-brine, acid and soda-resisting.
    5. Easy to assembly and repair at site.
   
    It is also very easy to assemble our insulated bodies, because applying   polyurethane adhesive to the joint area of the all-closed sandwich panels,   which ensures the joint reliability and optimum insulation, forms them. All   bodies CKD we provide have included all necessary accessories such as   aluminum angles, aluminum corner, sealing glues, screws, side guards, etc.   Therefore, you can assemble them by yourself without purchasing any material.   Generally, 3-4 workers can assemble 5-6 bodies everyday. Moreover, at the   beginning we will assign our engineers to supply you some technical guidance.
Panel ThicknessSide PanelTop/Floor PanelFront/rear Panel
General   body 82mm105mm/105mm82mm/82mm
Ice   cream body105mm125mm/125mm105mm/82mm
Steel Structure:
    Material:High strength low alloy steel with 350 MPa yield strength is used   for welded I-beam and 235 MPa in other fabricated parts.
OEM Parts Configuration:
   
King Pin: 3.5”   /2”  exchangeable king pin, Supplier:   JOST.
   
Landing Gear: 2   speed road side winding with sand shoe,Type: JOST C200T.
   
Suspension:Mechanical suspension with 11/10/8/7   leaf spring (W100mm x T12mm per leaf). options: Bogie Suspension, Air Spring   Suspension
   
Axles: square axle   with 12 tons capacity. Supplier & type: BPW/ FUWA/SAF/L1.
   
Rims: 10 Holes ISO.   Made in China. Option By the Factory..
   
Tires: 11R22.5   OPTIONS: 12R22.5, 315/80R22.5,385/65R22.5 , options: Michelin,Firestone,   Double Coin
   
Brake System: Dual   air brake system, Wabco relay emergency valve, OPTIONS: ABS.
   
Brake Chamber: 30   type on front axle.30/30 type on other axles,
   
Electrical System: Complete   24V installation with modular wiring harness. 7 pole plug placed at front in   accordance to ISO, norms NO.1185. 
Others:
   
Spare Tire    Carrier: Equipped two sets per chassis   without spare tire.
   
Side Guard:   Steel.
   
Tool Box: Equipped   one set.
   
Painting: Color by   customer’s requirement.
   
Marking: By   customer’s requirement.
   
Options: Oil Tanker:   300L carbon steel.


Main Character

All-close panels produced with German Technology and Machines, adhesive structure with the type of building block, Freon-free polyurethane vesicant material is our innovation,which are very different from traditional open sandwich panel with connect by metals, injected polyurethane at site with Freon.Our surfaces of panels are FRP, the middle with PU foam sheet, The Both surface FRP is connected by FRP stiffener to the whole, During producing, the E-glass fiber, UPR(unsaturated polyester ester resins) and fluorine-free PU foam structured together after heating and pressing , which also makes a layer of UV protection, waterproof, anti-aging, Anti-corrosion in the outer side surface of the panels at the same time.

The main characters are as follows:

1. Light in weight:40% lighter than metal body.

2. Better insulation: K value less than 0.3w/sqm*k.

3. High in strength and long life: 5 times longer than metal body.

4. Non-corrosion, non-pollution, anti-brine, acid and soda-resisting.

5. Easy to assembly and repair at site.

It is also very easy to assemble our insulated bodies, because applying polyurethane adhesive to the joint area of the all-closed sandwich panels, which ensures the joint reliability and optimum insulation, forms them. All bodies CKD we provide have included all necessary accessories such as aluminum angles, aluminum corner, sealing glues, screws, side guards, etc. Therefore, you can assemble them by yourself without purchasing any material. Generally, 3-4 workers can assemble 5-6 bodies everyday. Moreover, at the beginning we will assign our engineers to supply you some technical guidance.


Technology


Panel   ThicknessSide WallsRoof/Floor PanelFront/rear walls
General   body 82mm105mm/105mm82mm/82mm
Ice   cream body105mm125mm/125mm105mm/82mm


  MATERIAL OF THE BODY PANEL
Outside   panels are claded with high quality fiberglass of more than 3mm.thick in   one–Complete with whole panels after the Alkali Free Glassfibre heated and   high-pressed, white color, food hygienic and vermin proof materials
 MAIN   MATERIALSURFACE   LAYER OF PLASTIC RESIN CLOTHING, WATERPROOF :ASHLAND 
Panel Producing layer order
ALKALI FREE GLASS FIBRE/无碱玻璃纤维
UNSATURATED POLYESTERS RESINS:  DIC BRAND FROM JAPAN/不饱和聚酯树脂 
COLOPHONY :  ASHLAND   BRAND FROM AMERICA/胶衣树脂
PU : PUREN BRAND FROM CHINA & GERMANY JOINT VENTURE /聚氨酯(PU)泡沫 
BOND  :   HENKEL BRAND FROM GERMANY/粘合剂            德国汉高
Producing Equipment And Technology1.   Adopt the know-how and special equipments of Kogel Fahrzeugwerke AG to   produce the sandwich panels of refrigerated & insulated truck with   WET-IN-WET  method and high pressure,   vacuum workmanship.
  2. The special press machine can meet various   requirements of refrigerated & insulated bodies. The dimension of panel   can be chosen at the follow range: Length 0-14750mm  Width 0-3200mm Thickness 27-135mm
  3. The   insulated body is formed by applying polyurethane adhesive to the joint area   of the all-closed sandwich panels, which ensures the joint reliability and   optimum insulation.
BODY CONSTRUCTUREThe   whole van body is made up of six panels:Floor plate, Front wall, Two Side   wall, Roof and Rear wall portal. Self-supporting body, without cross bars   inside and outside skin made of glass fiber reinforced polyester, reinforced   with Z-straps.
  The core of hard foam with best insulation   properties.
  Without metallic carrier elements = without direct heat conductivity. The   bodies are watertight. The plastic elements are flame resistant.
  For galvanized door frame and G.P.R. panel. Due to   absence of metal, excellent insulation value is obtained. (No heat   conductivity). Thick wall door with 5 fold seal. Door lock with optimum   contact pressure.




Product Inquiry
GOT A QUESTION ?
If you have any questions please contact us
G.E.T was established with aim to create “The Special Logistic Future of possible”.

QUICK LINK

CONTACT US NOW

No 8001 Jingshi East Road
Copyright © GENEAL EAST CO.,LTD. All rights reserved.