Composite Panels: | Please select |
---|---|
Availability: | |
Quantity: | |
Product Description
a refrigerator truck body or chiller is a box designed with XPS /PU insulation foams to carry perishable freight at low temperatures. Refrigerator truckbody can be ice-cooled, equipped with any one of a variety of mechanical refrigeration systems powered by small displacement diesel engines, or utilize carbon dioxide (either as dry ice or in liquid form) as a cooling agent. These Truck Box is mainly designed for the cargos 's transportation asked the temperature controls , like frozen cargos, fresh foods & fruits , and other temperature sensitive machines .
Our Refrigerated truck box can get the best insualtion , with Refrigeration units can give an temperature range of -40 ~ +15 ℃ for almost general cargos transporation.
1. Light in weight:40% lighter than metal .
2. Better insulation: K value less than 0.3w/sqm*k.
3. High in strength and long life: 5 times longer than metal.
4. Non-corrosion, non-pollution, anti-brine, acid and soda-resisting.
5. Easy to assembly and repair at site.
Front Side Elevation
Interior Elevation*
Rear Lock Elevation
Meat Hanging System
MEAT CARASS HANGER TRUCK BODY WITH FRP-Pie Panel BOX | |||
MODEL: | GET.6KDX.XRG | ||
FRP-Pie Panel BOX is a pre-installed truck box which can be mounted directly onto the chassis of the vehicle using its lower fixed frame, This TRUCK BODY made with our FRP-Pie Panel Kits Van body panels, can equip the Thermoking or carrier refrigerator units to transport the frozen or fresh food and vegetables with temperature from -18 ℃ to 15℃. can also be refitted to be the RV MOTORHOME , expedition TRUCK BODY or Camper box with inside Furniture layout. As this box is Original German Technology , with wet-in wet process made, all the surface FRP are made with the rude Fibre glass material with an chemical process, so all the panels is sealed wtih the FRP, and made the panel as an whole like a pie. so we called FRP-Pie Modular Panel. |
Meat carcass hanging system
1. meat hanger box design with 3,4,5, 6 lines of sliding rail in the roof
2. meat carcass hanger hooks with stainless steel .
Meat carcass hanging roof
Special embedded meat carcass hanger roof panel with capacity of 4t/m to guarranty the static and dynamic capacity.
Anchoring rail and holder
The completely recessed anchor rail offers optimum load-securing through the complete load length.
Anchoring rail and holder to keep the hanging meat not slide and shake too muck during the truck running."
GENERAL PARAMETERS | |||
K .Value for the Composite Box | 0.295 W/㎡ ℃ | ||
Max. Overall Length | 48 ft | 14,750 mm | 0~14750mm can Customize |
Max. Overall Width | 10 ft | 3,200 mm | 0~ 3200 mm can Customize |
Max. Overall Height | 10 ft | 3,200 mm | 0~3200 mm can Customize |
Max. Floor Thinckness | 4 .13 inch | 105 mm | Special Embeded |
Side Wall Thickness | 3 .31 inch | 84 mm | Special Embeded |
Front Wall Thickness | 4 .13 inch | 105 mm | Special Embeded |
Rear Door Panel | 3 .31 inch | 84 mm | Special Embeded |
Roof Wall | 4 .13 inch | 105 mm | Special Embeded with 4T/m capacity |
super Structure | self-supporting body, without cross bars , inside and outside skin made of glass fibre reinforced polyester, reinforced with Z-Straps , the Core of hard foam with best insulation properties. Without metallic carrier elements = without direct heat conductivity The body are water tight the plastic elements are flam resistant | ||
Rear Wall | Two -wing Rear door , approx ,80 mm thick with 5-fold special sealing ,rigid frame joints. Each Door Wing with 1 external power-brace lock with one -hand operation Door Wings inclinable to the sidewalls with hold-open device (loose) | ||
Portal | stainless Steel | ||
Surface | The Plastic elements are painted white, White gelcoat colour both side, uv resistant, food grade approval |
2 Panel Full Opening
3 Panel Full Opening
4 Panel Full Opening
2 Panel Narrow Opening
single Panel Narrow Opening
Overhead Rear Door
Single Opening
Double Opening
Single Roll-up door
The used aluminum profile andonized silver , heat treated , harden metal which is made 6063 alloys,to wear resistance and strength to the box.
Alu. Extrusion | Extruded Angle 100 X 150 X 3mm,Made Of Aluminum Include Front , Rear, Top And Lower Round Corners. To Protect The Corner And The Side Of The Van. | ||
Interior wrapping edge | Made of aluminum only the top side to arrange the wire of the light. | ||
Front Vertical Extrusion | Made of aluminum alloy to protect the side edge of the van,vertical in the front is half round model, horizontal side is 90 degree angle model. |
Alu. Checked Floor
Alu.T Rail Floor
Load securing rail
PVC Curtain
Cargo Versatile Shelving
Hard Movable Door
door-in-door
Hydraulic Tail Gate
Refrigeration units:
Manufacturer : Thermoking or Carrier,
Refrigeration unit type : Engine Powered, Diesel Powered , Full- Electric Units; standby can Customize
Refrigeratant : R404T
Temperature sensors for medicine
two constant monitoring sensors, with the led interface panel in driver’s room for continuous monitoring of temperature, equipped with an alarm system.
Temperature sensors for normal carogs:
one constant monitoring sensors, with the led interface panel in driver’s room for continuous monitoring of temperature, equipped with an alarm system.
Volvo Truck Chassis
Hino Truck Chassis
Toyota Hinlux Chassis
FORD Truck Chassis
ISUZU Truck Chassis
JMC Truck Chassis
FOTON Aumark Chassis
HOWO Truck Chassis
It is very easy to assemble our insulated bodies, because applying polyurethane adhesive to the joint area of the FRP-Pie Panel Kits sandwich panels, which ensures the joint reliability and optimum insulation, forms them. All bodies ckd we provide have included all necessary accessories such as aluminum angles, aluminum corner, sealing glues, screws, side guards, etc. Therefore, you can assemble them by yourself without purchasing any material. Generally, 3-4 workers can assemble 5-6 bodies everyday. Moreover, at the beginning we will assign our engineers to supply you some technical guidance. | |||
CKD Panel Kits | 1. Prepare the chassis 2. Mount the partial Sub-Chassis and the floor plate on the chassis with Supplied U bolts and other parts 3. Mount the side, front and the roof and the Rear Door Portal and the door with Glues approx.1.5 hours, with a set time At Least 8 h at +20 ℃ . 4. Install the required options 5. Finishing | ||
CBU Box | 1.Prepare the chassis 2. Mount the BOX together with subframes on the chassis 3. Install the required options 4. Finishing |
What’s the material of your refrigerated truck body? |
We can produce FRP (Fiberglass Reinforced Plastic), Color Steel Sheet and Stainless-Steel Material for the refrigerated truck body. The Core Material can be PU, XPS. |
If want the price, what should offer us the information? |
You need offer us the material, size (LxWxH and the thickness of the panel) and quantity of the truck body as the basic information. |
What is the CKD and CBU means? |
CKD means completely knocked down. That means offer all the parts of the truck body (Semi-finished products), you need assemble the box first, then amount to your truck chassis. Though you must do some works, but it can save much shipping charges. |
How long life of your truck body? |
It depends how will use it. Normally, the life is about 15~20 years |