Aluminum Profiles Assembled All - Closed FRP / GRP Refrigerated Truck Body And Sandwich Panel Kits,Germany Wet-Wet Composite
Product Parameters
Aluminum Profiles Assembled All - Closed FRP / GRP Refrigerated Truck Body And Sandwich Panel Kits,Germany Wet-Wet Composite
Refrigerated truck, sometimes we call it reefer truck box body. Sometimes we call it freezer truck box body. Sometimes chiller truck box body. Sometimes cold room truck box body. All in all, We calls it refrigerated truck.Reefer truck box body is a kind of box which can load the cargoes which need to keep cold and fresh. Such as icecream, chill chicken, chill fish, freezer meat, sometimes vegetables and so on.
Our refrigerated truck box body is the Sandwich structure. External FRP material+PU core+Internal FRP. Normally, the thickness of FRP is 2mm. It also can be customized. As the PU core, normally, the density is more than 40kg/m. And the thickness is changeable by customers’ request and designing request.
The parts of FRP reefer truck box body is adopted the highest configuration. They are 304 stainless steel parts for door lock and door frame. Aluminum profile for connecting all the panels. The importing rubbers make the door be sealing. So the whole reefer truck box body is all-closed without any gap.
| Aluminum Profiles Assembled All - Closed FRP / GRP Refrigerated Truck Body And Sandwich Panel Kits,Germany Wet-Wet Composite | |||||
| The Refrigerated And Insulated Box Can Fit For The Chassis Of | |||||
| VOLVO,BENZ,MAN,Scania, Isuzu,JMC,JAC,Foton,FAW,HOWO,Sinotruk,Shacman,Beiben, Tata,Mitsubishi,Ford,Toyota | |||||
| Main Structure of the Panel | Firber Glass+PU +FirberGlass | ||||
| Thickness of the Box Panel | Roof/ mm | Wall / mm | Floor / mm | Door / mm | |
| 105 | 82 | 105 | 82 | ||
| Insulation Material | All panels, floor & roof of the box will be insulated with polyurethane foam (pu) of density 40kg/m3, which can carry the thermal conductivity value 0.3kcal/m3. the gas leakage rate of the body insulation is less than 0.3w/㎡*k | Standard | |||
| Drain Pipes | 2 Nos. PVC U-Pipe,30mm Dia. Drain With Drain Cap At The Front End. | Standard | |||
| Internal Kick Plate | Aluminum Checked Kick Plate Of 30cm High For Leak Proof And Wall Protection.Thickness 3mm | Options | |||
| Front Wall Reinforcement: | 1.Steel Plate Designed As Supporting Frame To Carry The Cooling Unit Safely, Suitable For THERMO KING Or Carrier . | Options | |||
| 2. Cooling Unit Cut Out Finish GRP Frame 3mm Thick. | |||||
| Floor | Floor construction | 1.all closed struture , without any metal . | |||
| 2. enforcement of built in wooden cross members to keep the transverse force condition of the panel. | |||||
| 3. polyurethane insulation of overall thickness 82mm. Density 40kg/m3 under a layer of the plywood 12mm.thick | |||||
| 4. GRP /FRP skin 2.5mm thick | |||||
| Surface | Standard:the floor surface is covered totally by white grp made together with the floor panel. | Standard | |||
| Options: aluminum checked plate ，aluminum channels as repuired. | Options | ||||
| Aluminum Profiles | The used aluminum profile andonized silver , heat treated , harden metal which is made 6063 alloys,to wear resistance and strength to the box. | ||||
| External Angle | Extruded Angle 100 X 150 X 3mm，Made Of Aluminum Include Front , Rear, Top And Lower Round Corners. To Protect The Corner And The Side Of The Van. | Standard | |||
| Interior wrapping edge | Made of aluminum only the top side to arrange the wire of the light. | Standard | |||
| External wrapping edge | Made of aluminum alloy to protect the side edge of the van,vertical in the front is half round model, horizontal side is 90 degree angle model. | Standard | |||
| Lights | Internal : | Internal Light LED Type 24V-8W, 2no’s Moisture Resistant. Fixed In The Roof. | Standard | ||
| External : | 2+2 No’S Light, At Front And Rear At Top,Front Is White, Rear Is Red. | Standard | |||
| Plastic Curtains | Side door | Pvc plastic curtains 3mm thick x 200mm wide, overlapped, long enough to cover the full height of the side door. | Options | ||
| Rear door | Pvc plastic curtains 3mm thick x 200mm wide | Options | |||
| the curtains are hanging on female stainless steel part joined to the male part fixed on the roof. | |||||
| Rear Door | Door type | 2 wing rear doors with grp outer and inner skin, full open . | standard | ||
| Options: 3 wings rear doors, tail lift at the rear. | Options | ||||
| Door harware | The accessories fitted with the door is made of stainless steel. | standard | |||
| 2 nos. Container type locks plus door retainers. | |||||
| Door seals | All edges of the door fitted with double aluminum profiles & epdm rubber gasket . Sealing against rain & dust | standard | |||
| Door holder & stoppers | 2 sets of stainless steel door retainers fitted strongly on built in plates inside the panels. 2nos. Of rubber made stoppers. | standard | |||
| Door handle | 20cm long 14cm dia. Stainless steel pipe to be mounted to the left door to hold the person get into the box | standard | |||
| Sub-frame | Carbon steel 16mn, dimenison per customer's chassis specification | Standard | |||
| Finishing-color | White gelcoat colour both side, uv resistant, food grade approval | ||||
| Other options | |||||
| A)side door (single opening) | 940*1740mm | Options | |||
| single wings open | |||||
| options: double wings open | |||||
| B) partition (removable) | To part the van space to different cargos loading space with different temperature ( if the refrigerator unit can) | Options | |||
| C) meat hang hooks | To hang the the big meat or fish to the roof | Options | |||
| Refrigerator | Thermoking,CARRIER,MITSUBISHI | ||||
| Material Of The Body Panel | Outside Panels Are Claded With High Quality Fiberglass Of More Than 3mm.Thick In One–Complete With Whole Panels After The Alkali Free Glassfibre Heated And High-Pressed, White Color, Food Hygienic And Vermin Proof Materials | ||||
| Main material | Surface layer of plastic resin clothing, waterproof :ashland | ||||
| Panel Producing Layer Order | |||||
| ALKALI FREE GLASS FIBRE/ | |||||
| UNSATURATED POLYESTERS RESINS | |||||
| COLOPHONY : ASHLAND BRAND FROM AMERICA | |||||
| PU : PUREN BRAND FROM CHINA & GERMANY JOINT VENTURE | |||||
| BOND : HENKEL BRAND FROM GERMANY | |||||
| Producing Equipment And Technology | 1. Adopt The Know-How And Special Equipments Of Kogel Fahrzeugwerke AG To Produce The Sandwich Panels Of Refrigerated & Insulated Truck With WET-IN-WET Method And High Pressure, Vacuum Workmanship. | ||||
| 2. The Special Press Machine Can Meet Various Requirements Of Refrigerated & Insulated Bodies. The Dimension Of Panel Can Be Chosen At The Follow Range: Length 0-14750mm Width 0-3200mm Thickness 27-135mm | |||||
| 3. The Insulated Body Is Formed By Applying Polyurethane Adhesive To The Joint Area Of The All-Closed Sandwich Panels, Which Ensures The Joint Reliability And Optimum Insulation. | |||||
| Body Constructure | The whole van body is made up of six panels:floor plate, front wall, two side wall, roof and rear wall portal. Self-supporting body, without cross bars inside and outside skin made of glass fiber reinforced polyester, reinforced with z-straps. | ||||
| The core of hard foam with best insulation properties. | |||||
| Without metallic carrier elements = without direct heat conductivity. The bodies are watertight. The plastic elements are flame resistant. | |||||
| For galvanized door frame and g.p.r. panel. Due to absence of metal, excellent insulation value is obtained. (no heat conductivity). Thick wall door with 5 fold seal. Door lock with optimum contact pressure. | |||||
| Main instruction of the Panel kits and box | All-Close Panels Produced With German Technology And Machines, Adhesive Structure With The Type Of Building Block, Freon-Free Polyurethane Vesicant Material Is Our Innovation,Which Are Very Different From Traditional Open Sandwich Panel With Connect By Metals, Injected Polyurethane At Site With Freon.Our Surfaces Of Panels Are FRP, The Middle With PU Foam Sheet, The Both Surface FRP Is Connected By FRP Stiffener To The Whole, During Producing, The E-Glass Fiber, UPR(Unsaturated Polyester Ester Resins) And Fluorine-Free PU Foam Structured Together After Heating And Pressing , Which Also Makes A Layer Of UV Protection, Waterproof, Anti-Aging, Anti-Corrosion In The Outer Side Surface Of The Panels At The Same Time. | ||||
| Charactors | The Main Characters Are As Follows: | ||||
| 1. Light In Weight:40% Lighter Than Metal Body. | |||||
| 2. Better Insulation: K Value Less Than 0.3w/Sqm*K. | |||||
| 3. High In Strength And Long Life: 5 Times Longer Than Metal Body. | |||||
| 4. Non-Corrosion, Non-Pollution, Anti-Brine, Acid And Soda-Resisting. | |||||
| 5. Easy To Assembly And Repair At Site. | |||||
| Easy Assembly For Box | It Is Also Very Easy To Assemble Our Insulated Bodies, Because Applying Polyurethane Adhesive To The Joint Area Of The All-Closed Sandwich Panels, Which Ensures The Joint Reliability And Optimum Insulation, Forms Them. All Bodies CKD We Provide Have Included All Necessary Accessories Such As Aluminum Angles, Aluminum Corner, Sealing Glues, Screws, Side Guards, Etc. Therefore, You Can Assemble Them By Yourself Without Purchasing Any Material. Generally, 3-4 Workers Can Assemble 5-6 Bodies Everyday. Moreover, At The Beginning We Will Assign Our Engineers To Supply You Some Technical Guidance. | ||||