GET VEHICLES | TrailerBull
|Product Code:|| |
A lowbed trailer (low-loader in British English, low-bed in western Canada and South Africa or float in Australia and eastern Canada) is a semi-trailer with two drops in deck height: one right after the gooseneck and one right before the wheels. This allows the deck to be extremely low compared with other trailers. It offers the ability to carry legal loads up to 12 ft (3.66 m) tall, which other trailers cannot. Lowboys are used to haul heavy equipment such as bulldozers, industrial equipment etc.
|60T Capacity with 3 Axles||Fixed Gooseneck FGN Low Bed Trailer||with 8m flat bed For Heavy Construction Machine Transit|
|1. Model of Truck Trailers (Oem No.)||GET.9TD60.3/13|
|2. General Parameter Of The Container Truck Trailer|
|Overall Exterior Dimension (mm)||Length||13,000|
|Height(unload)||1960 ( Loading Ramp Unfolded)|
|Loading Deck Dimension (mm)||Length||8,718|
|Trailer Running System||Heavy Duty Trailer Axle-Drum||FUWA AXLE 15T|
|Tubeless Tires||Tubeless Tires , 11.00R22.5 (dual Tire),steel disc wheel, 10 holes ISO|
|Heavy Duty Suspension||Tandem Leaf Spring Ride Mechinical Suspension |
lowest cost; however, it has a rougher ride and adds more stress to the trailer
|* Air-ride Suspension : smoother ride, adding to the life of the trailer frame. Air rides can also be adjusted for a higher or lower deck height.|
|* Hydraulic suspension: an oil-filled system, allowing wide variation of axle movement|
|FGN Gooseneck with Straight " I " Beam, deck size: 8718x3000, the ground clearance of the bearing surface 860, Wabco Brake Valve to the ground 370mm.|
Tail Drop Loading Ramp
|Manual Operation Rear Loading Ramps: |
Heavy Duty Loading Ramps with Strong Springs for easy Drop Operation.
This can allow your Bulldozers transit fast and safe with an Handling Angle less than 22 Degree with an payload of more than 60T.
|Optional : |
Hydraulic Operation Rear Loading Ramps:
Rear Loading Ramps with Hydraulic System for easy Drop Operation.
This can allow your Bulldozers More transit fast and safe with an Handling Angle less than 22 Degree with an payload of Less than 30T.
Truck Trailer Running Gear System
|4. Running Gears|
|Landing gear||Jost Or CIMC Brand 28T two speed telescopic manual landing gear|
|Crank handle is located on the driver’s side of the chassis.|
|Brake System||Dual line pneumatic brake, SAE hose and connector, WABCO relay emergency valve, With ABS brake system.Optional: EBS|
|T30/30 spring brake chambers, T30 brake chambers|
|3/8” blue air tube for control and 3/8” red for supply, 40L air tanks|
|Electrical||OPTRONICS 12-volt LED lighting with Phillips mold seal wiring harness, meet DOT and SAE standards. |
Receptacle::7 way socket SAE standard, China
Wiring: Electric cable protected by PVC conduit on main frame
|Painting||Electrophoretic spraying, that is, water-based coating, can be dissociated into a water-soluble film-forming material which can form a film in water, and swims to the opposite electrode in a direct current electric field, and precipitates on the surface of the object to form a coating film|
|MISC||GET standard marking, document holder, conspicuity tape, Steel or black rubber mud flaps|
|Option||Hubodometer, PSI tire inflation system |
What We Can Make