A Truck Camper and Trailer Company.
 +86 137 9310 8666             Info@TrailerBull.com
You are here: Home » Products » Refrigeration Freight Truck Body » Refrigeration Box Truck Body » Insulated And Refrigeration Swap Box

Product Category

loading

Insulated And Refrigeration Swap Box

Share to:
sharethis sharing button
Swap boxes are the perfect units for inter-modal transport involving significant rail usage. The ability to simply switch our the swap body without downtimes enables you to consistently increase your vehicles’ use. In addition, with our swap trailer systems you make no compromises in terms of long-term investment security.
  • GET.6KDX.XKH.

  • GET INDUSTRY | TRAILERBULL

  • GET.6KDX.XKH.

Composite Panels:
Availability:
Quantity:

Product Description

1. Product Overview

a refrigerator truck body or chiller is a box designed with XPS /PU insulation foams to carry perishable freight at low temperatures. Refrigerator truckbody can be ice-cooled, equipped with any one of a variety of mechanical refrigeration systems powered by small displacement diesel engines, or utilize carbon dioxide (either as dry ice or in liquid form) as a cooling agent. These Truck Box is mainly designed for the cargos 's transportation asked the temperature controls , like frozen cargos, fresh foods & fruits , and other temperature sensitive machines .


Our Refrigerated truck box can get the best insualtion , with Refrigeration units can give an temperature range of -40 ~ +15 ℃ for almost general cargos transporation. 


2. Features at a Glance

Swap Box

1. Light in weight:40% lighter than metal .

2. Better insulation: K value less than 0.3w/sqm*k.

3. High in strength and long life: 5 times longer than metal.

4. Non-corrosion, non-pollution, anti-brine, acid and soda-resisting.

5. Easy to assembly and repair at site.






Koegel Refrigerated Truckbody 24

Front Side Elevation

Refrigerated Semi Trailers 92

Interior Elevation*

IMG_5479Rear Lock Elevation

Koegel Refrigerated Truckbody 85

Front Right Elevation

3. Product Parameters

SWAP BOX FOR INSULATION OR REFRIGERATION
 MODEL:  GET.6KDX.XKH.
Swap boxes are the perfect units for inter-modal transport involving significant rail usage. The ability to simply switch our the swap body without downtimes enables you to consistently increase your vehicles’ use. In addition, with our swap trailer systems you make no compromises in terms of long-term investment security.

REFRIGERATED-SWAP-BOX3

Special REQUIREMENTS


Robust Support Legs

The support legs 4 can be folded lengthwise 90°, extended to the sides and prove themselves through their durable design even under the harsh mounting and removal conditions.

4. Box Structure


super Structure self-supporting body, without cross bars , inside and outside skin made of glass fibre reinforced polyester, reinforced with Z-Straps , the Core of hard foam with best insulation properties.
Without metallic carrier elements = without direct heat conductivity
The body are water tight
the plastic elements are flam resistant
Rear Wall Two -wing Rear door , approx ,80 mm thick with 5-fold special sealing ,rigid frame joints.
Each Door Wing with 1 external power-brace lock with one -hand operation
Door Wings inclinable to the sidewalls with hold-open device (loose)
Portal stainless Steel 
Surface The Plastic elements are painted white, White gelcoat colour both side, uv resistant, food grade approval

5. Rear Door

2 panels full opeing

2 Panel Full Opening

3 Panels full opening

3 Panel Full Opening

4 panles full opening

4 Panel Full Opening

2 Panels Narrow Opening

2 Panel Narrow Opening

Single Panel Narrow Open

single Panel Narrow Opening

Overhead Rear Door

Overhead Rear Door


6. Side Door ( Optional )

Single Opening

Single Opening

Double Opening

Double Opening

Single Roll up door

Single Roll-up door


7. Aluminum Extrusions :

Alu Extrusion

The used aluminum profile andonized silver , heat treated , harden metal which is made 6063 alloys,to wear resistance and strength to the box.

Alu. Extrusion Extruded Angle 100 X 150 X 3mm,Made Of Aluminum Include Front , Rear, Top And Lower Round Corners. To Protect The Corner And The Side Of The Van.
Interior wrapping edge Made of aluminum only the top side to arrange the wire of the light.
Front Vertical Extrusion Made of aluminum alloy to protect the side edge of the van,vertical in the front is half round model,  horizontal side is 90 degree angle model.


8. Box profiles (Optional)

Checked Alu.Floor

Alu. Checked Floor

Alu T Rail Floorjpg

Alu.T Rail Floor

Load securing rail

Load securing rail

PVC Curtain

PVC Curtain

Cargo Versatile Shelving

Cargo Versatile Shelving

Temperature Partition

Hard Movable Door

door-in-door

door-in-door

Tail Lifter

Hydraulic Tail Gate


9. Temperature control

Refrigeration Partners

Refrigeration units

Manufacturer :  Thermoking or Carrier, 

Refrigeration unit type : Engine Powered,  Diesel Powered , Full- Electric Units; standby can Customize

Refrigeratant : R404T

 

Temperature sensors for medicine
two constant monitoring sensors, with the led interface panel in driver’s room for continuous monitoring of temperature, equipped with an alarm system. 

 

Temperature sensors for normal carogs:


one constant monitoring sensors, with the led interface panel in driver’s room for continuous monitoring of temperature, equipped with an alarm system


10. Amounted to the Trucks 

Volvo冷藏车 018

Volvo Truck Chassis

 Hino

Hino Truck Chassis

Toyota Hilux Freezing Truck-1

Toyota Hinlux Chassis

FORD

FORD Truck Chassis

Isuzu

ISUZU Truck Chassis

JMC

JMC Truck Chassis

Foton Aumark

FOTON Aumark Chassis

HOWO

HOWO Truck Chassis

11. Installation:

It is very easy to assemble our insulated bodies, because applying polyurethane adhesive to the joint area of the FRP-Pie Panel Kits sandwich panels, which ensures the joint reliability and optimum insulation, forms them. All bodies ckd we provide have included all necessary accessories such as aluminum angles, aluminum corner, sealing glues, screws, side guards, etc. Therefore, you can assemble them by yourself without purchasing any material. Generally, 3-4 workers can assemble 5-6 bodies everyday. Moreover, at the beginning we will assign our engineers to supply you some technical guidance.
CKD Panel Kits 1. Prepare the chassis
2. Mount the partial Sub-Chassis and the floor plate on the chassis with Supplied U bolts and other parts
3. Mount the side, front and the roof and the Rear Door Portal and the door with Glues approx.1.5 hours, with a set time At Least 8 h at  +20 ℃ .
4. Install the required options
5. Finishing
CBU Box 1.Prepare the chassis
2. Mount the BOX together with subframes on the chassis
3. Install the required options
4. Finishing

12. FAQ

What’s the material of your refrigerated truck body?

We can produce FRP (Fiberglass Reinforced Plastic), Color Steel Sheet and Stainless-Steel Material for the refrigerated truck body.

The Core Material can be PU, XPS.


If want the price, what should offer us the information?

You need offer us the material, size (LxWxH and the thickness of the panel) and quantity of the truck body as the basic information.


What is the CKD and CBU means?

CKD means completely knocked down. That means offer all the parts of the truck body (Semi-finished products), you need assemble the box first, then amount to your truck chassis. Though you must do some works, but it can save much shipping charges.
CBU means completely Building Unit. That is, we offer you the whole truck body, you just install it your truck directly.



How long life of your truck body?

 It depends how will use it. Normally, the life is about 15~20 years

 


Previous: 
Next: 
Product Inquiry

Related Products

GOT A QUESTION ?
If you have any questions please contact us
GET Vehicles was established with aim to create “Your Partner for Modern Transportation Vehicles ”.

Quick Link

Products

Contact Us Now

More >>
LEAVE US A MESSAGE
Leave A Message

帮助

Copyright © GENEAL EAST CO.,LTD. All rights reserved.
We use cookies to enable all functionalities for best performance during your visit and to improve our services by giving us some insight into how the website is being used. Continued use of our website without having changed your browser settings confirms your acceptance of these cookies. For details please see our privacy policy.
×