English
Product Description
This Flat bed semi trailer is designed for transporting a 20’ ISO container and other paked cargos. it meets all D.O.T., A.A.R., ANSI, T.O.F.C., FMVSS, SAE and TTMA specifications.
Front Elevation
Under Beam Elevation
Tail Elevation
| GENERAL PARAMETERS | |||
| Overall Length | 23.62 ft | 7,200 mm | |
| Overall Width | 8.14 ft | 2,480 mm | |
| Overall Height | 5.09 ft | 1,550 mm | |
| Fifth Wheel Height | 3.94 ft | 1,200 mm | |
| Kingpin Location | 2.3 ft | 700 mm | From the rear face of the front bolster |
| Landing Gear Location | 7.94 ft | 2,420 mm | From the kingpin center |
| Axle Spread | 4.3 ft | 1,310 mm | |
| Tandem Location | 14.11 ft | 4,300 mm | From Kingpin to Front Suspension Hanger |
| STEEL STRUCTURE AND COMPONENTS | |||
| Trailer Main beam | Deep: 450 mm (17.7") Auto-welt Main Beam With High strength low alloy steel with 350 MPa yield hot-rolled I-beam (Q345) | ||
| Flatbed Trailer Floor | 1/8" (3mm) Thickness ASTM A572 grade 50 Checked Steel Plate Options: 1/5" ( 5mm) | ||
| Kingpin Upper coupler | 1/4” pick up plate with JOST 2” diameter square type king pin per SAE standard | ||
| Flatbed Front Bolster | ASTM A572 grade 50 steel U form channel with 7'' wide x 6'' high x 5/16 thick open section, 3/8'' top plate | ||
| Rear Bolster | ASTM A572 grade 50 steel U form channel with 7'' wide x 7'' high x 5/16 thick open section, 3/8'' top plate | ||
| Rear Bumper | 100x100mm (4” x 4” ) square tube step with taper “H” section vertical member | ||
| Bar is welded to uprights and main beam. | |||
| Twist lock | 8 Sets | 1x40ft Container and 2x20ft Container | |
| TRAILER CHASSIS RUNNING GEAR | |||
| Landing gear | Jost Or CIMC Brand 28T two speed telescopic manual landing gear | ||
| Crank handle is located on the driver’s side of the chassis. | |||
| Trailer Suspension | Mechanical tandem suspension with 3-leaf springs. Options: Air Spring Suspension , Bogie Suspension | ||
| Axles | 150mm (6") Square axles with 13T/15T/16T/20T capacity, 10 HUB piloted hubs with outboard mounting cast steel drum (ABS Options) Option : Disc Type Manufacturer: FUWA ,Options: BPW,SAF | ||
| Wheels | steel disc wheel, 10 holes ISO, ; Option: Aluminum alloy rim | ||
| Tires | Tubeless Tires , 11.00R22.5 OPTIONS:,12.00R22.5,12.00R20,385/65R22.5,425/65R22.5 , Manufactuter: Double Coin, Triangle, Michelin, Firestone | ||
| Brake System | Dual line pneumatic brake, SAE hose and connector, WABCO relay emergency valve, OPTIONS: ABS brake system | ||
| T30/30 spring brake chambers, T30 brake chambers | |||
| 3/8” blue air tube for control and 3/8” red for supply, 40L air tanks | |||
| Electrical | OPTRONICS 12-volt LED lighting with Phillips mold seal wiring harness, meet DOT and SAE standards. Receptacle::7 way socket SAE standard, China Wiring: Electric cable protected by PVC conduit on main frame | ||
| Painting | Electrophoretic spraying, that is, water-based coating, can be dissociated into a water-soluble film-forming material which can form a film in water, and swims to the opposite electrode in a direct current electric field, and precipitates on the surface of the object to form a coating film | ||
| MISC | GET standard marking, document holder, conspicuity tape, Steel or black rubber mud flaps | ||
| Option | Hubodometer, PSI tire inflation system | ||
Customized Capacity Design
Wabco Brake
Best Axles & Suspension
Producing & Shipment
Trailer Details
Angola 500 Units
Tanzania- 100 units @SKD
Nigeria-600 units Flat Packed
Refrigerated Truck Body 
Box Body Semi-Trailers 
Walk in Cold Rooms 
Dry Freight Truck Body 
LPG - LNG - CNG 
Metal Fuel Tank Semi-Trailers 
Alu.- SS304 Tanks 
Insulated Tanker Trailers 
Organic Chemical Tanker Trailer 
Dry Bulk Pneumatic Tanks 
Rounded Tipper Semi-Trailers 
Dump Semi-Trailers 
ISO Container Chassis & Mafi 
Flatbed Semi Trailer 
Low Bed Semi Trailer 
Platform Semi-trailers 
Curtainsider Semi-trailers 
Draw Bar Trailers 
