English
loading
9513GDY
GET
8716
| Availability: | |
|---|---|
| Quantity: | |
Product Parameters
51550L LNG Tanker Semi Trailer with 3 Axles for Liquid Natural Gas,LNG Tanker Semi Trailer
LNG Tank trailer or tanker Trailer (United States usage) or tanker (United Kingdom usage), is a Trailer designed to carry Liquefied natural gas (LNG) is natural gas (predominantly methane, CH4, with some mixture of ethane C2H6) that has been converted to liquid form for ease and safety of non-pressurized storage or transport.The natural gas is then condensed into a liquid at close to atmospheric pressure by cooling it to approximately −162 °C (−260 °F); maximum transport pressure is set at around 25 kPa (4 psi). Because of LNG achieves a higher reduction in volume than compressed natural gas (CNG) so that the (volumetric) energy density of LNG is 2.4 times greater than that of CNG (at 250 bar) or 60 percent that of diesel fuel. This makes LNG cost efficient in marine transport over long distances and populared as an clean energy in these years.
| 51550L LNG Tanker semi trailer with 3 axles for Liquid Natural Gas | 9513GDY | ||
| overall dimension of the vehicle（mm） | Length | 13000 | |
| Width | 2500 | ||
| Height (unload) | 3995 | ||
| Overall dimension of outer shell（mm） | Length | 12850 | |
| Dia Φ | 2488 | ||
| Overall dimension of Inner vessel（mm） | Length | 12510 | |
| Dia Φ | 2338 | ||
| Volume m³ | 51.55 | ||
| Inner Vessel | Outer Jacket | ||
| Leakage Test Pressure Mpa | 0.7 | Helium Mass Spectrometer Leak Detector | |
| Design Pressuer Mpa | 0.7 | -0.1 | |
| Desgin Temperature (℃) | -196 | 50 | |
| working Pressure Mpa | 0.7 | -0.1 | |
| Test Pressure Mpa | 0.92 | 0.1 | |
| Tanker Filling Ratio | 0 | 1 | |
| Joint Efficiency | 1 | 0.85 | |
| Inner Tanker Material | SUS 304/06CR19NI10 | Q345R | |
| Thickness of the Shell/Head mm | 7.28/7.25 | 5.7/8.3 | |
| vacuum Degree of Interspace Pa | ≤1x10^-1 Absolute Pressure | ||
| Static Evaporation %/d | ≤ 0.21(LN2) | ||
| Thermal Insulation type | high-Vacuum Multi-layer insulation | ||
| Inner Tanker Mass | 12000 | ||
| Liquid Location Meter | Type | CYJ-I | |
| Model | Float Ball Type | ||
| Nominal Pressure | 4 MPA | ||
| Surverying Range | 0-1500mm | ||
| Safety Valve | Type | DA22Y-40P | |
| Model | Inner Full lift | ||
| Nominal Pressure | PN2.5Mpa | ||
| Norminal Diameter | DN25mm | ||
| Opening Pressure | 0.74 Mpa | ||
| capacity（L） | 51500 | ||
| GVW（kg） | 40000 | ||
| vehicle total weight（kg） | 20240 | ||
| rated payload（kg） | 19760 | ||
| Wheel base（mm） | 6960+1320+1320 | ||
| Tread（mm） | Tread at front | ||
| Tread at rear | 1840/1840/1840 | ||
| Front/Rear Overhang（mm） | /1520 | ||
| Approach/Departure angle（°） | /17 | ||
| Rated payload of Vehicle saddle | 16000 | ||
| Axle | BPW 12T*3 | ||
| Axle Capacity kgs | 8000/8000/8000 | ||
| Tyres | 12R22.5*12 | ||
| Tank Material | S30408+Q345R | ||
| Transport Material : | LNG | ||
| Insulated Cover | |||
| Suspension | Spring Leaf | ||
| Leaf Spring | /8/8/8 | ||
| remark: | |||
| Storage Tank volume:51.5 m3,LNG : 387.4kg/m3, WABCO Brake System and ABS, Clerance: 540 OPTIONAL : Spring Air SUSPENSION AND SUPER SINGLE TYRE | |||
| Tank facility | |||
| Design pressure | 0.7MPa (see technical proposals) | ||
| MAWP | 0.92MPa (see technical proposals) | ||
| Capacity | |||
| Code & Material | Stainless Steel 304/ Q345R | ||
| vacuum Degress of Interspace Pa | ≤1*10^-1 Absolute Pressure | ||
| Static Evaporation %/D | ≤0.21 (LN2) | ||
| Thermal Insulation type | High-Vacuum Multi-Layer Insulation | ||
| Filling & Discharge System | Control method | Mechanical | |
| Liquid discharge | Single liquid discharge system | Side of the trailer | |
| Valve box | Single valve boxes | Side of the trailer | |
| Vales | Brand | ||
| Emergency Valve (Liquid Phase) | Rego | ||
| Emergency Valve(Gas Phase) | Rego | ||
| PRV | Rego | ||
| Vent Valve | Rego | ||
| Liquid Adaptor | Rego | ||
| Gas Adaptor | Rego | ||
| Liquid Adapter Cap | Rego | ||
| Gas Adapter Cap | Rego | ||
| Pressure Gauge | Rego | ||
| Angle Valve | Fisher | ||
| Thermometer | WIKA | ||
| Liquid Level Gauge | Rego | ||
| Ball valves (Liquid Phase) | Modentic valve | ||
| Ball valves (Gas Phase) | Modentic valve | ||
| Main Instruction Liquefied natural gas (LNG) is natural gas (predominantly methane, CH4, with some mixture of ethane C2H6) that has been converted to liquid form for ease and safety of non-pressurized storage or transport.The natural gas is then condensed into a liquid at close to atmospheric pressure by cooling it to approximately −162 °C (−260 °F); maximum transport pressure is set at around 25 kPa (4 psi). Because of LNG achieves a higher reduction in volume than compressed natural gas (CNG) so that the (volumetric) energy density of LNG is 2.4 times greater than that of CNG (at 250 bar) or 60 percent that of diesel fuel. This makes LNG cost efficient in marine transport over long distances and populared as an clean energy in these years. G.E.T Vehicles provides light weight and high-volume Liquefied GAS Transportation (LNG) tank semi-trailer with 3 axles and more to customers. With 56000-liter max volume, 1.0 Mpa, Super vacuum multi-layer insulation are used for Support of inner tank and outer tank parts; European ADR standard and ASME STANDARD, it is an optimal transporter for ENERGY logistic industry. Series of products: LNG cryogenic liquid Trailer, Cryogenic Industrial Gas Trailer, etc. Thermal-insulating mode：Super vacuum multi-layer insulation | |||
| OEM Parts Configuration: King Pin: 3.5” /2” JOST. Landing Gear: 2 speed road side winding with sand shoe,Type: JOST C200T. Suspension:Mechanical with 11 / 10/ 8/7 leaf spring (W100mm x T12mm per leaf). options: Bogie Suspension, Air Spring Suspension Axles: square axle with 12 tons capacity. Supplier & type: BPW/ FUWA/SAF/L1. Tires: 11R22.5 OPTIONS: 12R22.5, 315/80R22.5,385/65R22.5 , Triangle Brand , Made in China. Brake System: Dual air brake system, Wabco relay emergency valve, OPTIONS: ABS. Electrical System: Complete 24V installation with modular wiring harness. 7 pole plug placed at front in accordance to ISO, norms NO.1185. Side Lights: reflectors (orange); Rear Lights: direction indicators (orange) /brakes (red)/rear warning (white). | |||
| Others: Spare Tire Carrier: Equipped two sets per chassis without spare tire. Side Guard: Steel. Tool Box: Equipped one set. Painting: Color by customer’s requirement. Marking: By customer’s requirement. Options: Oil Tanker: 300L carbon steel. | |||
Main Instruction
We not only in the normal Carbon Steel and Aluminum tank , but also specializes in design, manufacturing, sales and technical service of various cryogenic equipments, including Cryogenic Liquid Storage Tank, Cryogenic Liquid Lorry Tanker, Large Pressure Tank, Liquid Tank Container, Cryogenic Thermal-insulating Cylinder, Vaporizer, Hazardous chemical storing and transporting equipments. We also gets involved in establishment of LNG applied projects and industrial gas applied projects.
Thermal-insulating mode：Super vacuum multi-layer insulation
Capacity：5M3-36M3
Working Pressure：0.3MPa-1.6MPa
Medium：LOX、LIN、LAr、LCO2、LC2 H 4、LH2 etc
Features：For material, we raise products efficiency with use of new material-the high strength stainless steel. We realize the maximum capacity among similar products, lower self-weight of vehicle as well as lower operation cost.
Refrigerated Truck Body 
Box Body Semi-Trailers 
Walk in Cold Rooms 
Dry Freight Truck Body 
LPG - LNG - CNG 
Metal Fuel Tank Semi-Trailers 
Alu.- SS304 Tanks 
Insulated Tanker Trailers 
Organic Chemical Tanker Trailer 
Dry Bulk Pneumatic Tanks 
Rounded Tipper Semi-Trailers 
Dump Semi-Trailers 
ISO Container Chassis & Mafi 
Flatbed Semi Trailer 
Low Bed Semi Trailer 
Platform Semi-trailers 
Curtainsider Semi-trailers 
Draw Bar Trailers 
