You are here: Home » Products » Liquid Tank Vehicles » LPG - LNG - CNG » 53000L LNG Energy Tank Semi Trailer with 3 Axles for Liquid Natural Gas,LNG Tanker Semi Trailer

Product Category

53000L LNG Energy Tank Semi Trailer with 3 Axles for Liquid Natural Gas,LNG Tanker Semi Trailer

LNG Tanker Semi trailer
Volume: 53000L
Inner/ Exterior Tanker Material: SUS304/Q345R
Thermal Insulation : High-Vacuum Multi-Layer Insulation

Model:
9533GDY
Brand:
GET
Code:
8716

Availability:

Quantity:



Inquire Add to Basket

Product Parameters

53000L LNG Tanker Semi Trailer with 3 Axles for Liquid Natural Gas,LNG Tanker Semi Trailer

LNG Tank trailer or tanker Trailer (United States usage) or tanker (United Kingdom usage), is a Trailer designed to carry Liquefied natural gas (LNG) is natural gas (predominantly methane, CH4, with some mixture of ethane C2H6) that has been converted to liquid form for ease and safety of non-pressurized storage or transport.The natural gas is then condensed into a liquid at close to atmospheric pressure by cooling it to approximately −162 °C (−260 °F); maximum transport pressure is set at around 25 kPa (4 psi). Because of LNG achieves a higher reduction in volume than compressed natural gas (CNG) so that the (volumetric) energy density of LNG is 2.4 times greater than that of CNG (at 250 bar) or 60 percent that of diesel fuel. This makes LNG cost efficient in marine transport over long distances and populared as an clean energy in these years.

53000L LNG Energy Tank semi trailer with 3 axles for Liquid Natural Gas			9533GDY
overall dimension of the vehicle（mm）		Length	13000
		Width	2500
		Height (unload)	3890
Overall dimension of outer shell（mm）		Length	12850
		Dia Φ	2500
Overall dimension ofInner vessel（mm）		Length	12750
		Dia Φ	2500
capacity（L）			53000
GVW（kg）			40000
vehicle total weight（kg）			19000
rated payload（kg）			21000
Wheel base（mm）			6960+1320+1320
Tread（mm）	Tread at front
	Tread at rear		1840/1840/1840
Front/Rear Overhang（mm）			/1520
Approach/Departure angle（°）			/17.2
Rated payload of Vehicle saddle			16000
Axle			BPW 12T*3
Axle Capacity kgs			8000/8000/8000
Tyres			12R22.5*12
Tank Material			S30408+Q345R
Transport Material :			LNG
Insulated Cover
Suspension			Spring Leaf
Leaf Spring			/8/8/8
remark:
Storage Tank volume:53 m3,LNG : 396.3kg/m3, WABCO Brake System and ABS, Clerance: 520 OPTIONAL : Spring Air SUSPENSION AND SUPER SINGLE TYRE
Tank facility
Design pressure		0.7MPa (see technical proposals)
MAWP		0.92MPa (see technical proposals)
Capacity
Code & Material		Stainless Steel 304/ Q345R
vacuum Degress of Interspace Pa		≤1*10^-1 Absolute Pressure
Static Evaporation %/D		≤0.21 (LN2)
Thermal Insulation type		High-Vacuum Multi-Layer Insulation
Filling & Discharge System	Control method	Mechanical
	Liquid discharge	Single liquid discharge system	Side of the trailer
	Valve box	Single valve boxes	Side of the trailer

Main Instruction

We not only in the normal Carbon Steel and Aluminum tank , but also specializes in design, manufacturing, sales and technical service of various cryogenic equipments, including Cryogenic Liquid Storage Tank, Cryogenic Liquid Lorry Tanker, Large Pressure Tank, Liquid Tank Container, Cryogenic Thermal-insulating Cylinder, Vaporizer, Hazardous chemical storing and transporting equipments. We also gets involved in establishment of LNG applied projects and industrial gas applied projects.

Thermal-insulating mode：Super vacuum multi-layer insulation

Capacity：5M3-36M3

Working Pressure：0.3MPa-1.6MPa

Medium：LOX、LIN、LAr、LCO2、LC2 H 4、LH2 etc

Features：For material, we raise products efficiency with use of new material-the high strength stainless steel. We realize the maximum capacity among similar products, lower self-weight of vehicle as well as lower operation cost.